ADLINK Technology DB-8151 User Manual Download Page 91

Page: 91 / 98

Function Library: PCI-8154 + DB-8151

*mode

: Set the mode

0: differential type

1: single-ended input.

last_channel

: For single-ended setting, the maximum last

channel is 15. For differential setting, the maximum last channel is
7.

*last_channel

: Obtain the last channel depending on what you

set previously. For single-ended setting, the maximum last chan-
nel is 15. For differential setting, the maximum last channel is 7.

ai_channel

: Specify the AI channel of the slave module which

want to perform this function. The valid value is described as fol-
lows.

For HSL-AI16AO2-M-VV/AV:

Differential: 0 - 15

Single-ended: 0 - 7

ao_channel

: Specify the AI channel of the slave module which

want to perform this function. For HSL-AI16AO2-M-VV/AV, the
valid value is 0 and 1.

*ai_data

: The AI data of the specified channel. The unit is Volt

for HSL-AI16AO2-M-VV module and mA for HSL-AI16AO2-M-AV
module.

ao_data

: The AO data of the specified channel in unit of volts.

*ver

: kernel version number.

@ Return Code

ERR_No_Error

ERR_Invalid_Board_Number

ERR_Connect_Index

ERR_Time_Out

ERR_Memory_Mapping

ERR_Satellite_Number

ERR_Satellite_Type

ERR_Over_Max_Address

ERR_AI16AO2_Signal_Range

Summary of Contents for DB-8151



































































































Search results

Summary of Contents for DB-8151

Reviews:

Related manuals for DB-8151

Brands by name

Popular brands

ADLINK Technology DB-8151, User Manual

Search results

Summary of Contents for DB-8151

Reviews:

Related manuals for DB-8151

Brands by name

Popular brands