Function Library: PCI-8154 + DB-8151
69
_8154_db51_HSL_D_write_all_slave_output
:
This function is to write the digital output values from all slave I/O
modules. In this function, all digital output values from all slave I/O
modules can be written at one time.
_8154_db51_HSL_D_set_input_logic
:
This function is to set the digital input logic to the specified slave I/
O module. The slave I/O module‘s address is slave_No.
_8154_db51_HSL_D_set_output_logic
:
This function is to set the digital output logic to the specified slave
I/O module. The slave I/O module‘s address is slave_No.
_8154_db51_HSL_D_set_int_renewal_type
:
This function is used to set the types of hardward interrupt occur-
rence timing. There are 3 kind of types that are described as fol-
low.
Type 1
: Generates hardware interrupt when any DI datas transi-
tion are detected.
Figure 5-1: HSL DI Interrupt for Example#1
……
Time
R
W
ID#1
ID#2
ID#3
ID#4
ID#1
ID#2
Full Duplex Mode
R
W
R
W
R
W
R
W
R
W
INT
DI transition
Driver reset state
Summary of Contents for DB-8151
