56
HSL LinkMaster Utility for DB-8151
9.
Calibration
. Calibrates the module. The modules are
shipped with correct calibration. Refer to Appendix C if
you want to recalibrate the module.
10.
Exit
. Closes the utility.
11.
Slave Status
: Shows the communication status between
the slave module and the master card. The functions
definition are enumerated below.
Z
Bit 0 is Data_Req bit.
Z
Bit 2 is for CHK1. When Bit 2 is equal to 1, a communi-
cation error occurred once).
Z
Bit 3 is for CHK3. When Bit 3 is equal to 1, a communi-
cation error occurred three times.
Z
Bit 4, Bit 5 and Bit 6 bits are for CHK7. When Bit 4, Bit 5,
and Bit 6 are all equal to 1, a communication error
occurred seven times.
4.2.9
HSL-4XMO Utility
Refer to the HSL-4XMO user’s manual.
Summary of Contents for DB-8151
