ADLINK Technology cPCI-6765, User Manual

Page: 23 / 82

Getting Started 15
2.6 Powering Up the System
Connect the supplied power cord to the socket on the back of the
chassis. All supplied PSUs are full range 90-240VAC and do not
require input voltage setting. Insert the desired boards into the
appropriate card slots as described in Sections 2.2 and 2.3.
The cPCIS-6400U/X subsystems feature a guarded power switch
and reset button that provide ATX power control capability. Use
the tool provided in the Accessory Packet or a suitably shaped
object (such as a pen) to actuate the power switch and reset
button. Voltage LEDs allow convenient monitoring of the power
supply.
Refer to the diagrams below for LED and switch locations.
cPCIS-6400U Series (redundant PSU)
Figure 2-7: cPCIS-6400U Series switches and LEDs