ADLINK Technology cPCI-6530BL Series, User Manual

Page: 129 / 137

IPMI User Guide 117
cPCI-6530BL
10 IPMI User Guide
10.1 Introduction
This chapter is written for those who already have a basic under-
standing of the newest implementation of the baseboard manage-
ment controller (BMC) of the Intelligent Platform Management
Interface (IPMI) specification rev. 2.0. It also describes the OEM
extension IPMI command usages which are not listed in the IPMI
specification.
10.2 Summary of Commands Supported by
BMR-AVR-cPCI
The table below lists all the commands supported by the IPMC.
The right most column indicates if a particular command is manda-
tory or optional for PICMG 3.0/2.9.
Command
IPMI
Spec
NetFn CMD
Description
(Required by PICMG 3.0/2.9)
IPM Device "Global" Commands
Get Device ID 20.1 App 01h
This command is used to retrieve the
Intelligent Device’s Hardware Revision,
Firmware/Software Revision, and Sensor
and Event Interface Command
specification revision information.
Cold Reset 20.2 App 02h
This command directs the Responder to
perform a ‘Cold Reset’ of itself.
(Optional/Optional)
Warm Reset 20.3 App 03h
This command directs the Responder to
perform a ‘Warm Reset’ of itself.
Get Self Test
Results
20.4 App 04h
This command directs the device to
return its Self Test results, if any.
(Mandatory/Mandatory)