Page 46
nanoX-BT
7.3.3.1.
AMI Graphics Output Protocol Policy
Feature
Options
Description
Intel(R) Valley View Graphics Controller
Info only
Intel(R) GOP Driver
Info only
Output Select
[List connect device]
CRT Output
Interface.
Brightness Setting
[LFP device connect only]
255
Set GOP Brightness value
BIST Enable
Enabled
Disabled
Starts or stops the built-in self-test (BIST) on the integrated display
panel.
7.3.4.
SATA
Feature
Options
Description
SATA Info
only
SATA Controller(s)
Enabled
Disabled
Enable/Disable Serial ATA.
SATA Mode Selection
IDE Mode
AHCI Mode
Select IDE/AHCI
SATA Test Mode
Enabled
Disabled
Test Mode enable/disable
SATA Controller Speed
Gen1
Gen2
SATA speed support Gen1 or Gen2.
SATA Port Configuration
Submenu
7.3.4.1.
SATA > SATA Port Configuration
Feature
Options
Description
SATA Port Configuration
Info only
Port X
Disabled
Enabled
Enable/Disable SATA port X.
HotPlug Enabled
Disabled
Enable/Disable SATA port X hotplug.
7.3.5.
USB
Feature
Options
Description
USB Info
only
USB Module Version Info
only
USB Devices
Info only
Drives, keyboards, mouse, hubs
Legacy USB Support
Enabled
Disabled
Auto
Enables legacy USB support.
Auto option disables legacy support if no USB devices are
connected.
Disable option will keep USB devices available only for EFI
applications and setup.
XHCI Hand-off
Enabled
Disabled
This is a workaround for OSes without XHCI hand-off support. The
XHCI ownership change should be claimed by the XHCI OS driver.
