ADLINK Technology COM Express Express-CFR, User Manual

Page: 63 / 108

Express-CFR
BIOS Setup
57
Feature Options Description
the Package RAPL algorithm.
Platform PL1 Time Window 0 Platform Power Limit 1 Time Window value in
seconds. The value may vary from 0 to 128. 0 =
default values. Indicates the time window over which
Platform TDP value should be maintained.
C states
Disabled
Enabled
Enable/Disable CPU Power Management. Allows
CPU to go to C states when it's not 100% utilized.
Package C State Limit C0/C1
C2
C3
C6
C7
C7S
C8
C9
C10
CPU Default
Auto
Maximum Package C State Limit Setting. Cpu Default:
Leaves to Factory default value.Auto: Initializes to
deepest available Package C State Limit.
Active Processor Cores
All
1
2
3
4
5
6
7
8
Number of cores to enable in each processor
package.
VT-d Disabled
Enabled
VT-d capability.
DTS SMM Disabled
Enabled
Critical Temp Reporting
(Out of spec)
Disabled: ACPI thermal management uses EC
reported temperature values.
Enabled: ACPI thermal management uses DTS SMM
mechanism to obtain CPU temperature values.
Out of Spec: ACPI Thermal Management uses EC
reported temperature values and DTS SMM is used to
handle Out of Spec condition.
Intel Trusted Execution Technology
Disabled
Enabled
Enables utilization of additional hardware capabilities
provided by Intel (R) Trusted Execution Technology.
Changes require a full power cycle to take effect.
7.3.2. Graphic Configuration
Feature Options Description
LVDS Info only
Data format and Color Depth VESA 24 bpp
JEIDA 24 bpp
JEIDA/VESA 18 bpp
Data format and Color Depth select
LVDS Output Mode Dual LVDS bus
Single LVDS bus
Single/Dual mode select.
DE Polarity
Active High
Active Low
DE Polarity select.
Hsync Polarity
Active High
Active Low
Hsync Polarity select.