ADLINK Technology COM Express Express-CFR, User Manual

Page: 11 / 108

Express-CFR
Specifications
5
2.6. Multi I/O and Storage
Integrated
Intel® QM370/HM370/CM246 Chipset
USB
(1)
4x USB 3.0 (USB 0,1,2,3), 4x USB 2.0 (USB 4,5,6,7)
All USB supported by xHCI controllers
SATA
(2)
4x SATA 6Gb/s (SATA 0,1,2,3)
GPIO/SD
4 GPO and 4 GPI (GPI with interrupt)
SD/GPIO muxed design, switched by BIOS setting
SD functions as storage device only
Notes:
(1) USB 3.1 Gen2 support is dependent on carrier board design.
(2)
For SATA 6Gb/s compatibility, it is strongly recommended to use a SATA redriver on the carrier board.
2.7. Serial I/O on Module
z
Chipset:
Nuvoton NCT5104D
z
Ports:
2x UARTs Rx/Tx only
z
Console Redirection:
COM 1 or COM 2 selectable in BIOS
COM Port Description IRQ Address Console redirection support
COM 1 Supported by module (SER0, A98/A99), via NCT5104D 4 0x3F8 Yes
COM 2 Supported by module (SER1, A101/A102), via NCT5104D 3 0x2F8 Yes
COM 3 Supported by Super I/O (W83627DHG) on carrier board 5 0x240 Yes
COM 4 Supported by Super I/O (W83627DHG) on carrier board 7 0x248 Yes
Note:
NCT5104D is 16550-compatible and supports up to 1.5Mb/s (baud rate at 24MHz).
2.8. Trusted Platform Module (TPM)
z
Chipset:
Infineon solution
z
Type:
TPM 2.0 (TPM 1.2 by BOM option, support by project basis)
2.9. SEMA Board Controller
z
Type:
ADLINK Smart Embedded Management Agent (SEMA)
z
Functions:
•
Voltage/Current monitoring
•
Power sequence debug support
•
AT/ATX mode control
•
Logistics and forensic information
•
Flat panel control
•
General purpose I2C
•
Failsafe BIOS (dual BIOS)
•
Watchdog timer and fan control