aTCA-3710 User's Guide
59
Switch one 10GbE port of the BCM56842 to the Base Switch (BCM56334) and check the status.
Set the BCM56842 to default status.
Switch UART Serial Port between Front Panel and IPMC
One UART serial port connects to either the front panel RJ- 45 console port or to the SOL port (Smart
Fusion A2F500 UART #0), but not to both at the same time.
The user can switch the RJ-45 serial port on the front panel to connect to either the LMP or to the IPMC.
The UART serial port connects to the LMP by default. The DIP switch setting shown is: SW2-1 ON,
SW2-2 ON.
The UART serial port connects to the IPMC in debug mode. The DIP switch setting show is: SW2-3 ON,
SW2-4 ON.
root@atca-3710:~# ipmitool raw 0x2e 0x70 0x13 0x5f 0x00 0x00
13 5f 00
root@atca-3710:~# ipmitool raw 0x2e 0x71 0x13 0x5f 0x00
13 5f 00 00
root@atca-3710:~# ipmitool raw 0x2e 0x70 0x13 0x5f 0x00 0x01
13 5f 00
