Page 4
2. Installation
2.1 Transport
instructions
The machine comes to you
either shrink-wrapped or in a box. If you
have to transport the machine at any time it is recommended that you
use a similar box and packing method. Please let the machine cool
down and lower the handle to the locked position.
2.2
Installing the machine
2.2.1
Remove all
packaging from the heat press.
2.2.2
Check to ensure
that no damage has been caused to the
machine during transit.
2.2.3
Place the machine
on a sturdy horizontal surface that is within
easy reach of the operator and allow space for the handle to
move up to the loading position. Ensure that no items
vulnerable to heat radiation are too close to the machine.
2.3 Electrical
requirements
The Studio Plate Press
should be connected to the mains supply,
(nominally 230V AC for the European Market or 110V AC for
America) by the mains cable provided and a suitable plug.
The press is
designed for 230 volts AC 50/60 hertz and require
exclusive use of a power outlet rated for at least 10amps (Europe),
OR
for 110 volts AC
5%, 15 amps (America).
Ensure that
the supply rating on the machine specification plate
corresponds with your local supply and that the correct plug is fitted.
MAINS LEAD
The wires
in this mains lead are coloured in accordance with the
following code:
Green and Yellow
:
EARTH
Blue
:
NEUTRAL
Brown:
LIVE
As the colours
of the wires in the mains lead of this apparatus may not
