Page 3
1.2 Safety
Our customer service
department
has its own service
engineers and, if required, maintenance and advice is available.
The Studio Mug Press
meets the European Legislation
standard. Under normal conditions accidents are rare.
However listed below are some practical points to ensure your
safety.
Always switch off
the mains supply (and pull plug out of
the socket) when undertaking maintenance work or when
cleaning the machine.
Ensure that there is
sufficient space around the machine.
Cables and connections must not get jammed. Although
the heat radiation of the press is low, there should be
enough space for cooling down.
Avoid contact
with the press element.
DO NOT REMOVE THE COVER OR CONTROLLER
UNLESS QUALIFIED TO DO SO
- touching internal parts
is dangerous and may cause shock hazard. All electrical
connections inside covers are live. Never operate Press with
any covers and/or guards removed.
PROTECT THE MAINS CABLE
- Damage to the mains
cable may cause fire or shock hazard. When unplugging, hold
by the plug only and remove carefully. Take care that the
mains cable does not come into contact with the heater element
(or moving parts of the mechanism) during operation of the
machine.
OPERATING AMBIENT TEMPERATURE RANGE
- the
operating ambient temperature range is 32
o
F - 104
o
F, (0
o
C -
35
o
C) and humidity of 20 - 80%.
MACHINE FUSES
- type: 3Amps
WARNING - THIS APPARATUS MUST BE EARTHED
(GROUNDED).
CAUTION
This machine gets hot whilst operating. Take care not to touch
any surfaces that are labelled “Caution HOT”.
Keep hands
away from heating element.
MACHINE
OPERATION
Only persons trained to do so should operate this machine.
This machine is designed to be operated by one operator
only.
