Page 2
1.2 Safety
Tips
If required, our customer service team
can arrange
maintenance service.
The Studio Large Format Clam Press
meets the European
Legislation standard. Under normal conditions accidents are
rare. However listed below are some practical points to ensure
your safety.
Always use both hands
when opening or closing the press
for positive control of the movement of the handle.
Always switch off
the current (and pull plug out of the
socket) when undertaking maintenance work or when
cleaning the machine.
Ensure that there is
sufficient space around the machine.
Cables and connections must not get jammed. Although
the heat radiation of the press is low, there should be
enough space for cooling down.
Avoid contact
with the heat plate.
DO NOT REMOVE THE INSTRUMENT COVER
UNLESS QUALIFIED TO DO SO
- touching internal parts
is dangerous and may cause shock hazard. All electrical
connections inside covers are live. Never operate Press with
any covers and/or guards removed.
PROTECT THE MAINS CABLE
- damage to the mains
cable may cause fire or shock hazard. When unplugging, hold
by the plug only and remove carefully. Take care that the
mains cable does not come into contact with the heat plate (or
moving parts of the mechanism) during operation of the
machine.
OPERATING AMBIENT TEMPERATURE RANGE
-
the
operating ambient temperature range is 32
o
F - 104
o
F, (0
o
C -
35
o
C) and humidity of 20 - 80%.
MACHINE FUSES
- Mains 32 amp/Auxiliary 3 amp.
WARNING
- THIS APPARATUS MUST BE
EARTHED (GROUNDED)
CAUTION
This machine gets hot whilst operating. Take care not to touch
any surfaces that are labelled “Caution this plate is HOT”.
MACHINE OPERATION
Only persons trained to do so should operate this machine.
