5.2 Control Unit Operation
Setting Temperature
1.
2.
3.
4.
5.
Setting Time
1.
2.
3.
4.
5.
Switch on machine.
Press 'MODE' button to select 'SET'
on RH indicator.
Press the ' ' arrow button to select
the first digit (which will flash). Press
the ' ' button to change the digit
(between 1 and 9). Repeat this
procedure for the remaining two
digits.
When the required temperature is
reached press and 'MODE' button
twice, the temperature is then set.
Press 'RUN' button to start the
machine heating to the selected
temperature.
Switch on machine.
Press 'MODE' button twice to select
'TIME' on RH indicator.
Press the ' ' arrow button to select
the first digit (which will flash). Press
the ' ' button to change the digit
(between 1 and 9). Repeat this
procedure for the remaining two
digits.
When the required time is reached
press 'MODE' button twice, the time
is then set.
Press 'RUN' button to start the
machine using the newly selected
time value.
Page 12
N.B.
The head must always be in the up position before the controller is set
