Page 12
4. Maintenance of the Machine
4.1
Daily Maintenance
For good press results
it is important to keep the press surfaces clean.
Wipe the surface of the heat plate with a dry non-abrasive cloth before
use when the plate is cold.
When heat plates are hot and not in use, keep in the open position away
from the silicone pad.
4.2
Periodic Maintenance
Periodically clean the Teflon® coated heat platen with a non-abrasive
piece of cloth. Stubborn stains may be cleaned,
when platen is cool
,
with mineral spirits.
4.3
General Maintenance
The following checks should be carried out at regular intervals by a
qualified cand competent person:-
•
Pneumatic system for air leaks
•
Pneumatic system for lubrication
•
Electrical connections
•
Belt tension and condition
•
Mechanical moving parts
Any enquiries to:
4.4
Cleaning
First unplug the machine.
Clean the outside of the machine frequently
with a clean, moist cloth. This may conveniently be carried out when
the machine is cold.
To prevent soiling of substrate, periodic wiping of entire exterior
machine, including platens, with a clean rag is recommended. If
necessary, use mineral spirits for cleaning a
cold
machine. Since
mineral spirits are flammable, use precautions at all times and keep
away from sparks, flames or hot heat platen.
