Page 6
2
Installation
2.1
Transport instructions
The machine comes to you,
shrink wrapped, or shrink wrapped in a
wooden box, and held in place with foam and banded onto a pallet. If
you have to transport the machine at any time it is recommended that
you use a similar box and packing methods. Please let the machine cool
down, and remove the swing head handle.
2.2
Installing the machine
Take the machine out of the box,
due to the weight of the machine we
recommend that this be a 4-person task. Put the machine on a sturdy
worktable close to a suitable electric socket and compressed air supply
connection point within easy reach of the operator. There must be
sufficient space for the machine’s head to swing to the right and left
until it hits the built in stop and back to the pressing position without
creating trapping points against adjacent articles. Ensure that no items
vulnerable to heat radiation are too close to the machine.
2.3
Electrical requirements
The Omega Series 1000 Press
should be connected to the mains supply
(nominally 230 V AC for the European Market) a moulded plug is fitted
to the cable provided.
The press is designed
for 230 volts AC 50/60 hertz and requires
exclusive use of a power outlet rated for at least 13 amps (Europe).
Ensure that the supply rating
on the machine specification plate
corresponds with your local supply and that the correct plug is fitted.
MAINS LEAD
The wires in this mains lead
are coloured in accordance with the
following code:
Green and Yellow:
EARTH
230 VAC
Blue:
NEUTRAL
Brown:
LIVE
