background image

Page 16 

7. Guarantee 

(Limited Warranty)

 

 

 
 

A. Adkins & Sons Limited 

warrants that the press is free from defects 

in material and workmanship for a period of 12 months from the date of 
supply to the customer.  The machine comes with a one-year warranty 
on parts and 90 days labour. 
 

This warranty covers 

all parts to repair the defects, except when 

damage results from misuse or abuse, accident, alteration or negligence 
or when a machine has been improperly installed. 
 

If a press covered by warranty

 should need to be returned to the 

factory for examination and repair, if on-site component replacement is 
not possible, A. Adkins & Sons Limited will make every effort to repair 
the customers press. The warranty will only be effective when A. 
Adkins & Sons Limited authorises the original purchaser to return the 
machine to the factory and only when the product upon examination has 
proven to be defective. 
 

Should in our opinion

 any part of this press be defective in materials or 

workmanship, it will be replaced or repaired free of charge, provided 
that the press has been installed and operated in the correct manner and 
not subjected to misuse. If A. Adkins & Sons Limited authorise a 
replacement press, the warranty of the replacement press shall expire on 
the anniversary date of the original machines invoice to the customer. 
 

In order for this warranty to be effective

, no return of machine or 

parts may be made without prior factory authorisation. (This will 
exclude any travelling and/or carriage costs which will be charged at 
our discretion). 
 

This is the sole warranty given by the company

; there are no 

warranties, which extend beyond the description on the face hereof. The 
seller disclaims any implied warranty of merchantability and/or any 
implied warranty of fitness for a particular purpose; the buyer agrees 
that the goods are sold “as is”. A. Adkins & Sons Limited does not 
warrant that the functions of the press will meet the customer’s 
requirements or expectations. The entire risk as to use, quality and 
performance of the press lies with the customer. (No claim of any kind 
shall be greater than the sale price of the product or part to which the 
claim is made). 
 

In no event will A. Adkins & Sons Limited 

be liable for any injury, 

loss or damage, including loss of profits, destruction of goods or any 
special, incidental, consequential or indirect damages arising from the 
use of the press or accompanying materials. This limitation will apply 
even if A. Adkins & Sons Limited or its authorised agent had been 
advised of the possibility of such damage. 
 
 
 
 
 
 

 

Summary of Contents for Mini Clam





















Reviews: