Page 6
Working with Heat Transfer Materials (cont.)
Unload the garment from the table of the machine
taking
care not to touch the heat plate to avoid risk of a burn.
3.3
Pressing Pad Assembly
The pressing pad
normally supplied with this machine is silicone
rubber. The pressing pad must be maintained in good condition at all
times and replaced when showing signs of wear. A worn pressing pad
will always affect the quality of printing/fusing. Do not insert items
into the machine, which would tend to cut the pressing pad, i.e. buttons,
pins, press-studs or zips.
Never allow
the hot heat plate to rest on the pressing pad when the
press is not being used as the pad may be damaged.
IMPORTANT NOTE:
The pressing pad
supplied with the machine is of the correct thickness.
Using a thicker pad may invalidate your warranty.
3.4
Shutting Down the Machine
To shut down the machine
, turn off the on/off switch at the side of the
machine. The handle should be in the up position.
