Do not remove the cover under any conditions. There are no user serviceable parts inside.
Never operate this unit when it’s cover is removed.
Never plug this unit in to a dimmer pack
Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm)
between this device and a wall.
Do not attempt to operate this unit, if it becomes damaged.
During long periods of non-use, disconnect the unit’s main power.
Always mount this unit in safe and stable matter.
Power-supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to the point they exit from the unit.
Features
Control Channels: 2, 4 or 13 DMX Channels
Control Mode: Sound Active mode, Auto mode, RGB mode, Master Slave, DMX control mode
Working Environment: Indoor, -20
°
-40
°
Mixing Color: RGB mixing color
IP Grade: IP20
Power Supply: AC 100-240V/50-60Hz
LED Unites: 252 pcs (Red: 84, Green: 84, Blue 84)
Led Beam Angle: 30 degrees
Power consumption: 28W
Weight: 6.6lb(1pc/CTN)
Dimensions: 42" x 4.7" x 4.7"
Operation
DMX address setting: The LED MINI DERBY uses 8 DMX channels. To set the DMX starting channel
address press the MODE button until you see A--- , then use the UP and DOWN buttons to select the
desired starting address, then press the ENTER button to save. DMX starting address can be A001
- A512. See the DMX channel functions below.
Internal program running: There are several internal programs to choose from. Press the MODE
button to choose different programs. See chart below.
Mode Button selections:
Working Modes are: DMX mode, AUTO mode, EDIT mode, SLAVE mode
d.001 - d.512 = DMX Control mode. choices: d-P1 (4 ch DMX), d-P2 (13 ch DMX), d-P3 (2 ch DMX)
See DMX mode operation charts below
AUTO
= Automatic mode. Choices: At.01 - At.22 (see Auto Mode chart below)
EDIT
= Edit mode. Choices are Pr.01 - Pr.18 (see Edit Mode chart below)
SLAV
= Slave mode - copies master
Summary of Contents for LED ColorBar
Page 6: ......
