Unpacking:
Thank you for purchasing the LED ColorBar by Adkins Pro Lighting. Every LED ColorBar has been
thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture
for any damage and be sure all accessories necessary to operate the unit has arrived intact. In the case damage has
been found or parts are missing, please contact our customer support number for further instructions. Do not return
this unit to your dealer without first contacting customer support.
Installation:
The unit should be mounted using a mounting clamp (not provided), affixing it to the mounting
bracket that is provided with the unit. Always ensure that the unit is firmly fixed to avoid vibration and slipping while
operating. Always ensure that the structure to which you are attaching the unit is secure and is able to support a
weight of 5 times the unit’s weight. Also, always use a safety cable that can hold 6 times the weight of the unit when
installing the fixture. The equipment must be installed by a professional, and it must be installed in a place where it
is out of the reach of people’s grasp.
Caution! No user serviceable parts inside do not attempt repairs. In the event your
LED ColorBar
should fail, contact Adkins Pro Lighting.
Introduction
The Adkins Lighting LED ColorBar is a high quality, high power, intelligent, DMX Light fixture. This fixture can be used
in standalone mode, DMX Controller mode or connected in a Master/Slave configuration. Please read these
instructions carefully to familiarize yourself with the basic operations of this unit.
Note:
The data inside this Manual may changed without notifying you due to continuous improvement.
Safety specifications
This device for indoor use only
，
the protection grade is: IP20
The installation, operation and maintenance must be managed by the qualified professional, and
make sure to operate it under the instruction of the Manual.
The light was designed to protect against electric shock and must connected to an outlet that is well
grounded.
Please check if the voltage is AC 100-240V/50-60Hz before installing.
Do not operate when the cover is opened.
No user serviceable parts inside.
To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture
Do not spill water or other liquids into or on to your unit.
Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt
to remove or break off the ground prong from the electrical cord. This prong is used to reduce the
risk of electrical shock and fire in case of an internal short.
Disconnect from main power before making any type of connection.
Summary of Contents for LED ColorBar
Page 6: ......
