4
E
-95MR Hand Control Operation Guide 99300791-
c
E-95MR FUNCTION
IMPORTANT INFORMATION
READ ADVISORY INFORMATION IN THE OWNERS MANUAL CAREFULLY BEFORE
USING THIS PRODUCT. THE POTENTIAL FOR ELECTRICAL SHOCK EXISTS IF
ELECTRICAL COMPONENTS ARE NOT INSTALLED OR OPERATED PROPERLY.
TRANSMISSION INDICATOR LIGHT
Verifies a button is being pressed
and data is being sent to the bed.
FLAT BUTTON
Press to return bed to the level
position. To stop the bed while in
motion, press and hold any button
until bed movement ceases. This
button also turns off the
massagers.
SET BUTTON
Press to capture any position or
function of the bed as a
programmed position. Press the
MR button
to return the bed to the
custom programmed position.
To Program Set Position:
1. Set the head, foot, massage
and/or wave to the desired
setting.
2. Press and release the
set
button
.
3. Press and release the
MR
button.
HEAD UP/DOWN BUTTON
Press and hold to raise or lower
head section.
HEAD MASSAGE ARROW
BUTTONS
Press and hold to increase or
decrease head massage intensity.
WAVE ARROW BUTTONS
Press and hold—after the head and/
or foot massage, and the wave
system have been activated—to
increase or decrease wave speed.
HEAD MASSAGE ON/OFF
BUTTON
Switches the head massage on or
off. When switched on, the
massage has an automatic shut off
timer of 30 minutes.
WAVE ON/OFF BUTTON
Press—after the head and/or foot
massage have been activated—to
activate or deactivate the wave
vibration system.
MR BUTTON
Press to recall a position or
massage function set by the
set
button
.
FOOT UP/DOWN BUTTON
Press and hold to raise or lower
foot section.
FOOT MASSAGE ARROW
BUTTONS
Press and hold to increase or
decrease foot massage intensity.
FOOT MASSAGE ON/OFF
BUTTON
Switches the foot massage on or
off. When switched on, the
massage has an automatic shut off
timer of 30 minutes.
HAND CONTROL REQUIRES FOUR (4) AAA SIZE BATTERIES. TO CONSERVE
BATTERY LIFE, THE TRANSMITTER TURNS OFF ALL FUNCTIONS WHEN ANY
BUTTON IS PRESSED FOR MORE THAN 50 SECONDS.
NOTE