American DJ
®
6122 S. Eastern Ave.
Los Angeles CA. 90040
www.americandj.com
Rev. 8/08
User Instructions
American DJ
®
- www.americandj.com - X-Scan LED™ Instruction Manual Page 2
X-Scan LED™
General Information
X
-SCAN LED
PLUS
Unpacking: Thank you for purchasing the X-Scan LED™ by
American DJ®. Every X-Scan LED™ has been thoroughly tested and
has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during
shipping. If the carton appears to be damaged, carefully inspect
your fixture for any damage and be sure all equipment necessary to
operate the unit has arrived intact. In the event damage has been
found or parts are missing, please contact our toll free customer
support number for further instructions. Please do not return this
unit to your dealer without contacting customer support first.
Introduction:
The X-Scan LED™ is a eight channel DMX intelligent,
LED scanner. The X-Scan LED™ can operate as a stand alone fixture
or in a Master/Slave configuration. The X-Scan LED™ has two opera-
ting modes; sound active mode and DMX control. For best results
use fog or special effects smoke to enhance the beams projections.
Customer Support:
American DJ® provides a toll free customer
support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.americandj.com for any com-
ments or suggestions. Service Hours are Monday through Friday
9:00 a.m. to 5:00 p.m. Pacific Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: [email protected]
To purchase parts online visit http://parts.americandj.com
Warning! T
o prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe
