17
OPERATING INSTRUCTIONS
WiFLY Address Setting/WiFly On/Off:
This function is used to set the WiFly address and activate/deactivate the WiFly function. The
address must match the address that is set to your WiFly TransCeiver or WiFly controller.
1. Plug the fixture in and press the MODE button until “WIFI SET ADDR: XX” is displayed, where
“XX” represents a number between 00-14.
2. Use the UP or DOWN buttons to find and set your desired WiFly address. The address must
match the address that is set to your WiFly TransCeiver or WiFly controller.
3. After you have found and set your WiFly address, press the SET UP button to activate WiFly.
“WIFI SET STAT: XXX” will now be displayed. Use the UP or DOWN button to set the display to
“On” to activate WiFly. To deactivate WiFly, set the display to “Off”.
DMX State:
This mode defines how the fixture will behave in the event that the DMX signal is lost or interrupted.
You can also set this as the operating mode you would like the unit to return to when power is
applied.
1. Plug the fixture in and press the MODE button until “DMX MODE ADDR:XXX” is displayed.
2. Press the SET UP button until “DMX MODE NO: XXXX” is displayed, where “XXXX” represents
the current DMX state that is displayed.
3. Use the UP or DOWN buttons to select the operating mode you would like the unit to start up in
when power is applied, or when the DMX signal is lost.
• AUTO - If the DMX signal is lost or power is applied, the unit will automatically go into Auto
Run mode.
• BLACK - If the DMX signal is lost or power is applied, the unit will automatically go into
standby mode.
• HOLD - If the DMX signal is lost or power is applied, the fixture will stay in the last DMX set up.
Dimmer Curve Setting:
This is used to set the dimming curve used with DMX mode. See the Dimmer Curve Chart section
of this manual for detailed information.
1. Plug the fixture in and press the MODE button until “DMX MODE ADDR:XXX” is displayed.
2. Press the SET UP button until “DELAY:X” is displayed. “X” represents the displayed dimmer
curve (0-4).
• 0 - Standard
• 1 - Stage
• 2 - TV
• 3 - Architectural
• 4 - Theatre
3. Press the UP and DOWN buttons to scroll through and select the desired dimming curve.
