14
OPERATING INSTRUCTIONS
Operating Power:
There are two ways to supply power to this unit: battery power or AC power.
• AC Power - To run the unit using AC power, plug the unit into a power source, and put the Load
Switch into the ON position. When using AC power, make sure the Battery Switch is in the OFF
position.
• Battery Power - To run the unit using battery power, press the battery button located on the bot-
tom of the fixture across from power input connection. See the Battery Load sub-section of this
section for detailed directions.
LCD Display Lock:
The display will lock after 30 seconds. Press and hold the MODE button for 10 seconds to unlock
the display and access the menu.
Energy Saving Mode:
This will decrease the LED’s brightness gradually when the battery life is less than 80%, thereby
extending the battery life.
1. To activate energy saving mode, press the MODE button until “Energy SAVE:XX” is displayed.
“XX” represents either “ON” or “OFF”.
2. Press the UP or DOWN button so that “ON” is displayed. If “ON” is displayed already, this means
that the fixture is already in energy saving mode.
LED Display On/Off:
To set the LED display light to turn off after 30 seconds of inactivity, press the MODE button until
“OPTION” is displayed. Press the SET UP button so that “BLGT:XXX” is displayed, where “XXX” rep-
resents either ON or OFF. Press the UP or DOWN buttons so that OFF is displayed. Now the display
light will turn off after 30s of inactivity. Press any button to turn the display on again.
Operating Modes:
The WiFly EXR HEX5 IP has five operating modes:
• Static Color Mode - There are 63 colors to choose from.
• RGBWA+UV Dimmer Mode - Choose one of the six colors to remain static, or adjust the intensity
of each color to create a custom color.
• Auto Run - Will run a mixture of color fade and color change.
• Color Change Mode - Select 1 of 16 color change programs to run. Color change speed is
adjustable.
• Color Fade Mode - Select 1 of 16 color fade programs to run. Color fade speed is adjustable.
• DMX control mode - This function will allow you to control each individual DMX trait using a stan-
dard DMX 512 controller.
