manualshive.com logo in svg

ADJ WiFly Chameleon, User Instructions, Page: 16 / 18

Share
Download
ADJ WiFly Chameleon User Instructions Download Page 16

ADJ Products, LLC  -  www.adj.com  - WiFly Chameleon User Manual Page 15

  WiFly Chameleon                                    20 Channel Mode

  Channel   Value  

                  Function

       

1               0 - 255               RED PIXEL 1 0% - 100%

       2               0 - 255           GREEN PIXEL 1 0% - 100%

       3               0 - 255             BLUE PIXEL 1 0% - 100%

       4               0 - 255            WHITE PIXEL 1 0% - 100%

       5               0 - 255           AMBER PIXEL 1 0% - 100%

       6               0 - 255               UV PIXEL 1 0% - 100%

       7               0 - 255               RED PIXEL 2 0% - 100%

       8               0 - 255           GREEN PIXEL 2 0% - 100%

       9               0  -255             BLUE PIXEL 2 0% - 100%

      10              0 - 255            WHITE PIXEL 2 0% - 100%

      11              0 - 255           AMBER PIXEL 2 0% - 100%

      12              0 - 255               UV PIXEL 2 0% - 100%

      13              0 - 255               RED PIXEL 3 0% - 100%

      14              0 - 255           GREEN PIXEL 3 0% - 100%

      15              0 - 255             BLUE PIXEL 3 0% - 100%

      16              0 - 255            WHITE PIXEL 3 0% - 100%

      17              0 - 255           AMBER PIXEL 3 0% - 100%

      18              0 - 255               UV PIXEL 3 0% - 100%

      19              0 - 255           MASTER DIMMER 0% - 100%

      20                                                 STROBING 

                        0 - 31                              OFF

                      32 - 63                            LED ON

                      64 - 95               STROBING SLOW - FAST

                      96 - 127                          LED ON

                    128 - 159        PULSE STROBING SLOW - FAST

                    160 - 191                          LED ON

                    192 - 223                 RANDOM STROBING

                    224 - 255                          LED ON

ADJ Products, LLC  -  www.adj.com  - WiFly Chameleon User Manual Page 20

  WiFly Chameleon                            Operating Instructions

  •  To run the 6 Channel Mode, press the MODE button until  

 

  “CHAN:6” is displayed. This is the 6 Channel DMX Mode.

  •  To run the 7 Channel Mode, press the MODE button until  

 

  “CHAN:7” is displayed. This is the 7 Channel DMX Mode.

  •   To run the 9 Channel Mode, press the MODE button until  

 

  “CHAN:9” is displayed. This is the 9 Channel DMX Mode.

  •   To run the 11 Channel Mode, press the MODE button until    

  “CHAN:11” is displayed. This is the 11 Channel DMX Mode.

  •   To run the 18 Channel Mode, press the MODE button until    

  “CHAN:18” is displayed. This is the 18 Channel DMX Mode.

  •   To run the 20 Channel Mode, press the MODE button until    

  “CHAN:20” is displayed. This is the 20 Channel DMX Mode.

  5. After you have chosen your desired DMX Channel mode plug in  

  the fixture via the XLR connections to any standard DMX controller.

WiFly Activation and Addressing:

This function is used to activate WiFly and set the WiFly address. This 

address must match the address that is set to WiFly TransCeiver or 

WiFly controller. See page 24 for WiFly Set Up.

1.   Plug the fixture in and press the MODE button until “WIFI SETT  

    ADDR: XX” is displayed. “XX” represents the current WiFly    

    address setting, which is a number between 00-14.

2.   Use the UP or DOWN buttons to find your desired address. Then  

    press the SET UP button to activate WiFly control.

3.   Press the UP or DOWN buttons to either activate the remote func- 

    tion (On) or deactivate it (Off).

Color Balance Mode:

1.   Plug the fixture in and press the MODE button until “BALANCE” is  

    displayed. Press the SET UP button for at lease 3 seconds until  

    the displayed number begins to flash.

2.   When “RED” is displayed you are in Red balance mode. Press the  

    UP and DOWN buttons to adjust intensity.

3.   When “GREN” is displayed you are in Green balance mode.    

    Press the UP and DOWN buttons to adjust intensity.

4.   When “BLUE” is displayed you are in Blue balance mode. Press  

    the UP and DOWN buttons to adjust intensity.

5.   When “WHIT” is displayed you are in White balance mode.    

    Press the UP and DOWN buttons to adjust intensity. 

Summary of Contents for WiFly Chameleon



















Reviews:

No comments