manualshive.com logo in svg

ADJ Vizi Q Wash7, User Instructions, Page: 19 / 24

Share
Download
ADJ Vizi Q Wash7 User Instructions Download Page 19

ADJ Products, LLC  -  www.adj.com  - Vizi Q Wash7 Instruction Manual Page 36

ADJ Products, LLC  -  www.adj.com  - Vizi Q Wash7 Instruction Manual Page 37

  Vizi Q Wash7 

                                          System Menu

4. Either 

“Off”

 or 

“On”

 will be displayed, use the LEFT or RIGHT but-

tons to toggle between.
5. Press ENTER to confirm your selection or press MODE to exit.

Timer Pin - 

Timer Pin will allow you to clear the running time. See 

Clear Last for more information.
1. Press the MODE button to access the main menu. Press the UP 

or DOWN buttons so that 

“Information”

 is highlighted, then press 

ENTER. 
2. Press the LEFT or RIGHT buttons until 

“Time. Info”

 is displayed, 

press ENTER.
3. Press LEFT or RIGHT buttons, until 

“Timer Pin”

 is displayed, and 

press ENTER.
4. The 

“Timer Pin”

 is 050.

5. Press ENTER to confirm or press MODE to exit.

Clear Last - 

This will allow you to clear the LED running time. You 

need to put in the 

Timer Pin 

before doing this. Please see 

Timer Pin

.

1. Press the MODE button to access the main menu. Press the UP 

or DOWN buttons so that 

“Information”

 is highlighted, then press 

ENTER. 
2. Press the LEFT or RIGHT buttons until 

“Time. Info”

 is displayed, 

press ENTER.
3. Press LEFT or RIGHT buttons, until 

“Clear Last”

 is displayed, and 

press ENTER. 
4. Either 

“Off”

 or 

“On”

 will be displayed, use the LEFT or RIGHT but-

tons to toggle between.
5. Press ENTER to confirm or press MODE to exit.

Temp. Info - 

This will allow you to check the moving head tempera-

ture.
1. Press the MODE button to access the main menu. Press the UP 

or DOWN buttons so that 

“Information”

 is highlighted, then press 

  Vizi Q Wash7 

                                          System Menu

ENTER. 
2. Press the LEFT or RIGHT buttons until 

“Temp. Info”

 is displayed, 

press ENTER.
3. 

“Head Temp.”

 will now be displayed, press ENTER.

4. 

“XXX”

 will now be displayed. 

“XXX”

 represents the current tem-

perature of the moving head.
5. Press MODE to exit.

Error. Info - 

This will allow you to see any errors that have occured.

1. Press the MODE button to access the main menu. Press the UP 

or DOWN buttons so that 

“Information”

 is highlighted, then press 

ENTER. 
2. Press the LEFT or RIGHT buttons until 

“Error. Info”

 is displayed, 

press ENTER.
3.  Any errors that have occured to Pan, Tilt, etc will now be dis-

played.
4. Press MODE to exit.

Model. Info - 

This will allow you to see the model name

1. Press the MODE button to access the main menu. Press the UP 

or DOWN buttons so that 

“Information”

 is highlighted, then press 

ENTER. 
2. Press the LEFT or RIGHT buttons until 

“Model. Info”

 is displayed, 

press ENTER.
3.  The model name will now be displayed.
4. Press MODE to exit. 

Software. V - 

This will allow you to see the software version you are 

currently running.
1. Press the MODE button to access the main menu. Press the UP 

or DOWN buttons so that 

“Information”

 is highlighted, then press 

ENTER. 

Summary of Contents for Vizi Q Wash7

























Reviews:

No comments