ADJ Vizi Hybrid 16RX User Instructions Download Page 3

For Your Own Personal Safety, Please Read and Understand This 

Manual Completely Before You Attempt To Install Or Operate 

This Unit!

•   To reduce the risk of electrical shock or fire, do not expose this unit  

   rain or moisture

•   Do not spill water or other liquids into or on to your unit.

•   Be sure that the local power outlet match that of the required volt-

   age for your unit.

•   Do not attempt to operate this unit if the power cord has been 

   frayed or broken. 

•   Do not attempt to remove or break off the ground prong from    

   the electrical cord. This prong is used to reduce the risk of electrical  

   shock and fire in case of an internal short.

•   Disconnect from main power before making any type of connection.

•   Do not remove the cover under any conditions. There are no user  

   serviceable parts inside.

•   Never operate this unit when it’s cover is removed.

•   Always be sure to mount this unit in an area that will allow proper  

   ventilation. Allow about 6” (15cm) between this device and a wall.

•   Do not attempt to operate this unit, if it becomes damaged.

•   This unit is intended for indoor use only, use of this product out-

   doors voids all warranties.

•   Always mount this unit in safe and stable matter.

•   Power-supply cords should be routed so that they are not likely to  

   be walked on or pinched by items placed upon or against them,  

   paying particular attention to cords at plugs, convenience recep- 

   tacles, and the point where they exit from the appliance. 

• Cleaning -The fixture should be cleaned only as recommended by  

   the manufacturer. See page 40 for cleaning details.

•   Heat -This fixture should be situated away from heat sources such 

   as radiators, heat registers, stoves, or other appliances (including 

   amplifiers) that produce heat.

•   The fixture should  be serviced by qualified service personnel when:

    A. Objects have fallen, or liquid has been spilled into the appliance.

    B. The appliance has been exposed to rain or water.

    C. The appliance does not appear to operate normally or exhibits a  

     

  

 marked change in performance.

 Vizi Hybrid 16RX    

                       Safety Precautions

ADJ Products, LLC  -  www.adj.com  - Vizi Hybrid 16RX Instruction Manual Page 4

ADJ Products, LLC  -  www.adj.com  - Vizi Hybrid 16RX Instruction Manual Page 5

•  Philips® Platinum 16R Discharge Lamp

•   Micro-Stepping Motors for Smooth Color and Gobo Transitions

•   DMX-512 Protocol Compatible (19 DMX Channels)

•  3/5-Pin XLR In/Out

•  Independent Gobo and Color Wheels

•   2 Seperate Gobo Wheels

  16 Static Fixed Gobos + Spot & Frost

  12 Colored Glass Rotating Gobos + Spot 

•  14 Colors, Plus White and Split Colors

•  6 Facet Prism & 8 Facet Prism with Prism Morphing

•  Prism Rotation

•  Frost Filter

•  Strobe Effect

•  Motorized Focus

•  Motorized Zoom

•  3-32 Degree Beam Angle

•  360˚ Pan Movement Standard (540˚ Degree Optional)

•  270˚ Tilt Movement  

•  Pan/Tilt Invert

•  Pan/Tilt Speed Adjustment

•   Digital Display for Address and Function Setting

 Vizi Hybrid 16RX    

 

 

                   Features

Summary of Contents for Vizi Hybrid 16RX























Reviews: