ADJ Products, LLC - www.adj.com - Vizi Hybrid 16RX Instruction Manual Page 38
ADJ Products, LLC - www.adj.com - Vizi Hybrid 16RX Instruction Manual Page 39
Vizi Hybrid 16RX Lamp Replacement
Replacing the lamp is
relatively easy. Unplug the
unit from its power source.
Allow the unit 15 minutes
to cool down. Start by
unscrewing the two phillips
screws that hold the lamp
door in place. DO NOT
UNSCREW THE SCREW
LOCTATED ABOVE THE
MAIN SCREWS!
Pull the lamp door out and
rotate to the side as the
diagram shows. You will
not have access to the
lamp.
Vizi Hybrid 16RX Lamp & Fuse Replacement
Caution:
Always replace with the exact same type lamp and fuse,
unless otherwise specified by an authorized ADJ
®
service technician.
Replacing with anything other than the specified part can damage
your unit and will void your manufactures warranty.
Warning:
If you continue to blow lamps or fuses, STOP using the
unit. Contact customer support for further instructions, you may have
to return the unit for servicing. Continuing to use the unit may cause
serious damage.
Fuse Replacement:
First unplug the power. The fuse holder is
located next to the PowerCon connection. Using a phillips head screw
driver unscrew the fuse holder. Remove the bad fuse and replace with
a new one.
Lamp Replacement:
Caution! Never attempt to change the
lamp while the fixture is plugged in. Always disconnect the
main power and allow the unit at least 15 minutes to cool before
attempting to replace the lamp. Please see page 7 for important
information regarding the discharge lamp. See the next pages
for lamp replacement instructions. Be sure to follow the proper
handling procedures that deal with discharge lamps.
Vizi Hybrid 16RX
Photometric Chart
5.0
10.0
20.0
Distance(m)
0
0m( )
770000
220000
55000
5
0.41
0.81
1.6
Diameter(m)
(LUX)
