Vizi Hybrid 16RX
Cleaning
Vizi Hybrid 16RX
Trouble Shooting
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Make sure the lamp is “On”. See pages 25-26
2. Be sure the external fuse has not blown. The fuse is located on
the bottom panel of the unit.
3. Remove the lamp holder and be sure the lamp is seated in its
socket properly. Occasionally lamps become loose during ship-
ping be sure the lamp is push in to its socket all the way.
4. Be sure the fuse holder is completely and properly seated.
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning
the internal and external optical lenses and mirror should be carried
out periodically to optimize light output. Cleaning frequency depends
on the environment in which the fixture operates (I.e. smoke, fog
residue, dust, dew). In heavy club use we recommend cleaning on a
monthly basis. Periodic cleaning will ensure longevity, and crisp out-
put.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
ADJ Products, LLC - www.adj.com - Vizi Hybrid 16RX Instruction Manual Page 40
ADJ Products, LLC - www.adj.com - Vizi Hybrid 16RX Instruction Manual Page 41
Vizi Hybrid 16RX Lamp Replacement
Make sure the moving
head is right side up,
meaning the lettering is
not upside down. Care-
fully remove the lamp from
lamp housing by gently
sliding the lamp to the
right. It should “pop” out
on the left side. You should
now be able to remove the
lamp from the holders on
the right side.
Replace the lamp by plac-
ing the new lamp into the
right side lamp “sleeves”.
Once properly placed in
the “sleeves”, gently slide
the lamp to the right. Once
the lamp is to the right, the
lamp can now be placed
into left side “sleeves”
