ADJ VIZI CMY 16RX, User Instructions, Page: 34 / 40

ADJ Products, LLC
Ÿ
ww.adj.com
Ÿ
VIZI CMY 16RX User Instructions Page 34
Caution:
Always replace with the exact same type lamp and fuse, unless otherwise
specified by an authorized ADJ service technician. Replacing with anything other than
the specified part can damage your unit and will void your manufactures warranty.
Warning:
If you continue to blow lamps or fuses, STOP using the unit. Contact
customer support for further instructions, you may have to return the unit for servicing.
Continuing to use the unit may cause serious damage.
Fuse Replacement:
First unplug the power. The fuse holder is located next to the
powerCON connection. Using a Phillips head screwdriver unscrew the fuse holder.
Remove the bad fuse and replace with a new one.
Lamp Replacement:
Caution! Never attempt to change the lamp while the
fixture is plugged in. Always disconnect the main power and allow the unit at
least 15 minutes to cool before attempting to replace the lamp. Please see page
7 for important information regarding the discharge lamp. See the next pages
for lamp replacement instructions. Be sure to follow the proper handling
procedures that deal with discharge lamps.
Replacing the lamp is relatively easy. Unplug the unit
from its power source. Allow the unit 15 minutes to
cool down. Start by unscrewing the two Phillips
screws that hold the lamp door in place.
DO NOT UNSCREW THE SCREWS ABOVE AND
BELOW THE MAIN SCREWS!
Pull the lamp door out and
rotate to the side as the
diagram shows. You will
not have access to the lamp.
VIZI CMY 16RX
Lamp and Fuse Replacement