ADJ VIZI CMY 16RX, User Instructions, Page: 27 / 40

ADJ Products, LLC
Ÿ
ww.adj.com
Ÿ
VIZI CMY 16RX User Instructions Page 27
Temperature Unit: With this function, you can switch the temperature setting
between Celsius and Fahrenheit.
1. Access the main menu, and press the UP or DOWN buttons so that “Display
Setting” is highlighted, then press ENTER .
2. Press the UP or DOWN buttons until “Temperature Unit” is displayed, and
press ENTER . The current setting will now be displayed.
3. Use the
UP
or
DOWN
buttons to switch between °C or °F.
4. Press
ENTER
to confirm your selection or press the
MENU
button to return to
the main menu.
FIXTURE TEST
Fixture Test: With this function, you can run an Auto Test or a Manual Test.
1. Access the main menu, and press the UP or DOWN buttons so that “Fixture
Test” is highlighted, then press ENTER .
2. Use the UP or DOWN buttons to switch between “ Auto Test” or “Manual Test”.
3. Press ENTER to confirm your selection or press the MENU button to return to
the main menu.
FIXTURE INFORMATION
Fixture Hour Use:
With this function, you can check the fixture running time.
1. Access the main menu, and press the UP or DOWN buttons so
that “Fixture
Information
” is highlighted, then press ENTER .
2.
Press the
UP
or
DOWN
buttons until “
Fixture Hour Use
” is displayed, and
press ENTER . The fixture running time will now be dis
played.
3. Press the MENU button to return to the main menu.
Light Hour Use:
With this function, you can check the lamp running time and reset
the lamp running time.
NOTE: The lamp running time should be reset every time the
lamp is replaced.
1. Access the main menu, and press the UP or DOWN buttons so that “Fixture
Information” is highlighted, then press ENTER .
2. Press the UP or DOWN buttons until “Light Hour Use” is displayed, and press
ENTER . The lamp life running time will now be displayed. Press the UP or
DOWN
buttons to switch between “Exit” and “Reset Time”.
NOTE: If you have just replaced the lamp select “Reset Time” and press
ENTER. The lamp time will now be cleared.
3. To leave this function select “Exit” and press ENTER , or press the MENU button
to return to the main menu.
VIZI CMY 16RX
System Menu