ADJ VIZI CMY 16RX User Instructions Download Page 24 | Manualshive

Page: 24 / 40

ADJ VIZI CMY 16RX User Instructions Download Page 24

ADJ Products, LLC



ww.adj.com



VIZI CMY 16RX User Instructions Page 24

System Menu: When making adjustments press ENTER to confirm your
setup then press and hold the MENU button for at least 3 seconds. To exit
without making any adjustments press the MENU button. The display will
lock after 30 seconds; press the MENU button for 3 seconds to unlock.

DMX SETTINGS

DMX Address:

With this function, you can adjust the desired DMX address via the

Control Board.

1.

Access the main menu, and press the

UP

or

DOWN

buttons so

that “DMX

Settings” is highlighted, then press

ENTER

.

2.

Press the

UP

or

DOWN

buttons until “DMX Address” is displayed, and press

ENTER

. The current DMX address will now be displayed.

3.

Use the

UP

or

DOWN

buttons to adjust the DMX address.

4.

Press

ENTER

to confirm or press

MENU

button to return to the main menu.

DMX Channel Mode:

With this function, you can see the how many

DMX channels the

fixture has.

1.

Access the main menu, and press the

UP

or

DOWN

buttons so

that “DMX

Settings” is highlighted, then press

ENTER

.

2.

Press the

UP

or

DOWN

buttons until “Channel Mode” is displayed, and press

ENTER

. The number of DMX channels will now be displayed.

3.

Press the

MENU

button to return to the main menu.

DMX State:

This mode can be used as a precaution mode, that in case the DMX

signal  is  lost,  interrupted,  or  power  is  lost,  the  operating  mode  chosen  in  this
setup  is  the  running  mode  the  fixture  will  go  into  when  the  DMX  signal  is  lost.
You  can  also

set this as the running mode you would like the unit to return to

when power is applied.

1.

Access the main menu, and press the

UP

or

DOWN

buttons so

that “DMX

Settings” is highlighted, then press

ENTER

.

2.

Press the

UP

or

DOWN

buttons until “DMX State” is displayed, and press

ENTER

. Use the

UP

and

DOWN

buttons to switch between the two modes

(Blackout or Hold). Press the

ENTER

button to make your selection.

•

HOLD

- If the DMX signal is lost the fixture will stay in the last DMX setting.

If power is applied and this mode is set, the unit will automatically go into
the last DMX set up.

•

BLACKOUT

- If the DMX signal is lost or interrupted, the unit will

automatically go into stand by mode.

3.

Press the

MENU

button to return to the main menu.

VIZI CMY 16RX

System Menu

«
...
22
23
24
25
26
...
»

Summary of Contents for VIZI CMY 16RX









































Reviews:

No comments