ADJ ULTRA GO PAR7X User Instructions Download Page 4

ADJ Products, LLC  -  www.adj.com  - Ultra Go Par7X User Manual Page 7

life expectancy of the battery maybe shortened or the device 

in which the battery is used may be damaged by electrolyte 

gel leakage. If the batteries cannot maintain a charge for long 

periods of time, even when they are charged correctly, this may 

indicate it is time to change the battery.
6. Battery Disposal

Please dispose of battery according to local regulations.

  Ultra Go Par7X                                   Battery Precautions

ADJ Products, LLC  -  www.adj.com  - Ultra Go Par7X User Manual Page 6

area of contact immediately with fresh water and seek medical 

attention immediately.
3.4 Do Not Expose the Battery to Heat or Fire

Never incinerate or dispose of the batteries in fire. This may 

cause an explosion, which would be very dangerous.
3.5 Do Not Expose the Battery to water or liquids

Never soak/drop the batteries in liquids such as water, seawa-

ter, drinks such as soft drinks, juices, coffee or other.
3.6 Battery Replacement

For battery replacement please contact ADJ customer support 

(800) 322-6337.
3.7 Do Not use a damaged Battery

The battery could be damaged during shipping, caused by 

shock. Should the battery be found damaged, including dam-

ages to the plastic casing of the battery, deformation of the 

battery package, smelling of an electrolyte, or leakage of the 

electrolyte gel, or other, DO NOT use the battery. A battery with 

a odor of electrolyte or a gel leakage should be placed away 

from fire to avoid fire or explosion.
4. Battery Storage

When storing the battery, it should be stored at room tempera-

ture, with a charge of at least 50%. We recommend that during 

long periods of storage that the battery be charged every 6 

months. Doing this will prolong the life of the battery and will 

also make sure that the battery charge does not fall below the 

30% mark.
5. Other Chemical Reaction

Because batteries utilize a chemical reaction, battery per-

formance will deteriorate over time even if stored for a long 

period of time without being used. In addition, if the various 

usage conditions such as charge, discharge, ambient tempera-

ture, etc. are not maintained within the specified ranges, the 

  Ultra Go Par7X                                   Battery Precautions

Summary of Contents for ULTRA GO PAR7X















Reviews: