A.D.J. Supply Europe B.V. – www.americandj.eu – SP-1500 DMX MKII Strobe Manual Page 8
FUSE REPLACEMENT
First unplug the power. The fuse holder is located at the rear of the unit next to the power cord. Using a flat-
head screw driver unscrew the fuse holder. Remove the bad fuse and replace with a new one.
TROUBLE SHOOTING
Listed below are a few common problems that you may encounter, with solutions.
No light output from the unit:
1) Be sure you have connected your unit into a standard 230v wall outlet.
2) Be sure the fuse has not blown. The fuse is located on the rear panel.
Unit does not respond to sound:
1) Low frequencies (bass) should cause the unit to react to sound. Tapping on the microphone, quiet or
high pitched sounds may not activate the unit.
TECHNICAL SPECIFICATIONS
Lamp
XENON 1500W
Power
AC 230V 50Hz
Fuse
Circuit breaker 20A
Dimensions
452 x 147.5 x 116 mm
Weight
3.2 kg
A.D.J. Supply Europe B.V.
Junostraat 2
6468 EW Kerkrade
The Netherlands
www.americandj.eu
