ADJ Products, LLC www.adj.com - RGB 3C IR Page 10
RGB 3C IR Fader Functions
R/PROGRAM SELECT FADER
PROGRAMS
0-13 RED, GREEN, YELLOW 3 COLOR DREAM
14-27 BLUE, PURPLE, CYAN 3 COLOR DREAM
28-41 WHITE, RED, BLUE 3 COLOR DREAM
42-55 GREEN, BLUE, CYAN 3 COLOR DREAM
56-69 YELLOW, PURPLE, RED 3 COLOR DREAM
70-83 PURPLE, GREEN, WHITE 3 COLOR DREAM
84-97 YELLOW, CYAN, BLUE 3 COLOR DREAM
98-111 RED DREAMING
112-125 GREEN DREAMING
126-139 BLUE DREAMING
140-153 YELLOW DREAMING
154-167 PURPLE DREAMING
168-181 CYAN DREAMING
182-195 WHITE DREAMING
196-209 SEVEN COLOR JUMPING
210-223 SEVEN COLOR DREAMING
224-237 AUTO RUN
238-255 SOUND ACTIVE
G/PROGRAM SPEED FADER
0-255 PROGRAM SPEED SLOW - FAST
B/STROBE/SOUND SENSITIVITY FADER
0-3 OFF
4-255 STROBING SLOW-FAST
0-7 OFF
8-255 SENSITIVITY LOW - HIGH
NOTICE: The B/Strobe/Sound Sensitivity Fader has two func-
tions. When Sound Active mode is running, the fader will con-
trol the sound sensitivity level. When Program mode or Auto
mode is running the fader will activate and control strobing, if
strobing is desired.
RGB 3C IR ADJ LED RC2 Control
The
ADJ LED RC2
infrared remote has many differnet functions
that can help you control your
RGB 3C IR. To control the RGB 3C IR,
plug the included IR receiver into IR receiver input located on the rear
of the controller. You must aim the remote at the IR sensor and be no
more the 30 feet away.
BLACKOUT
-
Pressing this button will blackout any fixture being
controlled at the time (and not in a HOLD mode). When blackout is ac-
tive, the LED above the BLACKOUT button will light. Press the button
again to deactivate blackout.
HOLD
-
At anytime press the DMX MODE button, then press button
#1. The LED above the HOLD button will light, and lock the current
operation. to unlock the current operation, press the DMX MODE but-
ton, then press button #0. The LED above the HOLD button will turn
off letting you know that it is unlocked
SELECT PROG
-
Pressing this button will cycle among Static Color
mode, Programs mode, and Auto Run mode. Each press of the button
will switch to the next mode.
• Program Select Mode - When the controller is set to Program
Select mode, the LED above the PROG SELECT button (D3)
will glow. Use the “+” & “-” buttons to select 1 of 17 programs.
Press the SPEED button, and use the “+” & “-” buttons to adjust
the program running speed. Press the FLASH button to activate
strobing, and use the “+” & “-” buttons to adjust the flash speed.
• Auto Run Mode - When the controller is set to Auto Run mode,
the LED above the AUTO button (D4) will glow. Press the SPEED
button, and use the “+” & “-” buttons to adjust the auto run speed.
Press the FLASH button to activate strobing, and use the “+” & “-”
buttons to adjust the flash speed.
• Static Color Mode - When the controller is set to Static Color
mode, the LED above the COLOR SELECT button (D2) will glow.
Use the “+” & “-” buttons or 1-9 number buttons to find your de-
sired static color. You can also use the R/G/B buttons and use the
“+” & “-” buttons to adjust the output intensity.
SOUND ACTIVE MODE
-
Press the SL/SA button to activate Sound
Active mode. The LED above the button will glow indicating that your
ADJ Products, LLC www.adj.com - RGB 3C IR Page 11
