ADJ Products, LLC www.adj.com - RGB 3C IR Page 8
RGB 3C IR Controls and Functions
sounds may not trigger the unit.
6. B/FLASH/SOUND SENSITIVITY FADER - This fader has three func-
tions.
- This fader can be used to control the blue LEDs intensity in COLOR
SELECT mode.
- In AUTO MODE or PROGRAM SELECT MODE it can be used to acti-
vate strobe and control the speed of the strobe.
- In SOUND ACTIVE MODE the fader can control the sound sensitivity.
7. G/PROGRAM SPEED FADER - This fader has two functions.
- This fader can be used to control the green LEDs intensity in COLOR
SELECT mode.
- In AUTO MODE or PROGRAM SELECT MODE the fader can control
the speed of the running program.
8. R/PROGRAM SELECT FADER - This fader has two functions.
- This fader can be used to control the red LEDs intensity in COLOR
SELECT mode.
- In PROGRAM SELECT MODE the fader is used to search through the
different programs. The PROGRAM SELECT BUTTON must be active
before you can use this fader to search through the programs.
9. PROGRAM SELECT BUTTON (D3) - Use this button to activate the
PROGRAM MODE. Use the PROGRAM SELECT FADER (8) to search
through the different programs.
10. COLOR SELECT (D2) - Press this button to activate the COLOR MODE.
When this mode is active you can press one or two of the 9 Color
Buttons or use the faders to create your own color to remain static.
11. HOLD BUTTON (D1) - When this button is active all buttons and faders
will be inactive.
ADJ Products, LLC www.adj.com - RGB 3C IR Page 9
16. DMX OUT - Used to send DMX signal to the compatable LED fixtures.
17. DC INPUT - Accepts a DC 9V~12V, 300mA minimum, power supply.
18. IR RECEIVER SENSOR INPUT - Input for the included IR receiver sen-
sor.
RGB 3C IR Controls and Functions - Rear
RGB 3C IR Operation
Sound Active Mode:
1. Press the SOUND ACTIVE button and the corresponding LED
above the button will light.
2. Use the B/FLASH/SENSITIVITY fader to adjust the sound sensitiv-
ity level.
Auto Mode:
1. Press the AUTO button and the corresponding LED above the but-
ton will light.
2. Use the G/SPEED fader to adjust the running speed of the Auto
program.
3. Use the B/FLASH/SENSITIVITY fader to activate strobe and adjust
the rate of the strobe.
Program Select Mode:
1. Press the PROG SELECT button and the corresponding LED
above the button will light.
2. Use the G/SPEED fader to adjust the running speed of the Auto
program.
3. Use the B/FLASH/SENSITIVITY fader to activate strobe and adjust
the rate of the strobe.
Color Mode:
1. Press the COLOR SELECT button and the corresponding LED
above the button will light.
2. Press any of the 9 color buttons or use the RGB faders to make
your own desired color.
17
16
18
