ADJ PRO763, User Instructions, Page: 15 / 26

The UC IR infrared remote gives the user control of various functions, as listed below. To control the
fixture, the remote must be aimed at the front of the fixture. Maximum range is 30 feet. To use the ADJ
UC IR, the fixture’s infrared sensor must first be activated, as described in the Operating Instructions
section of this manual.
STAND BY - Press this button to blackout the fixture. Press again to return to the initial state.
FULL ON - Press this button to fully illuminate the unit. Press again to return to the unit back to its
previous state.
FADE/GOBO - This button has no defined function for this unit.
“” and “DIMMER -” - Use these buttons to adjust the output intensity in color mode.
STROBE - Press this button to activate strobing. Use buttons 1-4 to adjust the strobe speed. “1” isthe
slowest, and “4” is the fastest. Press this button again to deactivate strobing.
COLOR - Press this button to activate color mode. Use buttons 1-9 to find your desired color.
1-9 - Use buttons 1-9 to select your desired color when color mode is active. Use buttons 1-4 to select
your desired strobe speed.
SOUND ON & OFF - Use the buttons to activate and deactivate sound active mode.
SHOW 0 - Press this button to activate show mode. Use buttons 1-9 to select your desired show. Press
this button twice for show 10. Press button 1 twice for show 11.
U C I R C O N T R O L
15