ADJ PRO763, User Instructions, Page: 12 / 26

RGBA Dimmer Mode:
In this mode you can select and adjust the intensity of the red, green, blue, or amber colors to create a
custom color.
1. Plug the fixture in and press the MODE button until “MANUAL” is displayed.
2. Cycle through each color dimming mode. Use the UP and DOWN buttons to adjust intensity, then
press SET UP to cycle to the next color dimming mode. Colors are indicated as follows:
• rXXX = Red Dimming Mode
• GXXX = Green Dimming Mode
• bXXX = Blue Dimming Mode
• UXXX = Amber Dimming Mode
3. Next, activate strobing by pressing the SET UP button to enter the strobe mode. “FSXX” will be
displayed, indicating that the unit is in strobe mode. The strobe can be adjusted between “00” (flash
off) to “15” (fastest flash).
Auto Run Mode:
In this mode, the Profile Panel RGBA will run an auto program.
1. Plug the fixture in and press the MODE button until “AUTO” is displayed.
2. Press the SET UP button to adjust the fade time. “FdXX” should be displayed. Use the UP or DOWN
buttons to set the fade speed to either “Fd.00” (fade off) or between “Fd01” (fastest speed) and
“Fd99” (slowest speed).
3. Press SET UP to activate the Flash mode. “FS.XX” will now be displayed, indicating that the unit is
in Flash mode. The Flash can be adjusted between “FS00” (flash off) to “FS15” (fastest flash).
Built-In Program Mode:
1. Plug the fixture in and press the MODE button until “PrXX” is displayed. “XX” represents a number
from 1-22. Use the UP or DOWN buttons to scroll through the 22 programs. Please note that
programs 21 and 22 have adjustable colors. Press the SET UP button to select the desired program.
2. Pressing the SET UP button will display “SPXX”. When this is displayed, you can adjust the running
speed of your selected program. Use the UP or DOWN button to adjust the speed between “SP.01”
(slowest) and “SP99” (fastest).
3. Press the SET UP button to to enter the Fade adjustment mode. The screen should now display
“FdXX”. Use the UP or DOWN button to adjust the fade speed between “Fd.01” (fastest) and “Fd99”
(slowest) or “Fd00” (Off).
4. Press the SET UP button to enter the Flash (Strobe) mode. “FSXX” will be displayed, indicating
that the unit is now in Flash mode. The Flash can be adjusted between “FS00” (flash off) to “FS15”
(fastest flash).
NOTE: PROGRAMS 21 & 22 - If you have chosen programs 21 or 22, after the setting up Flash mode,
press the SET UP button. “C1XX” will be displayed, allowing the user to select the base color. Use the
UP and DOWN buttons to scroll through the 7 colors. Once you have chosen your base color, press the
SET UP button again so that “C2XX” is displayed, allowing the user to select the moving color. Use the
UP and DOWN buttons to scroll through the 7 colors.
O P E R AT I N G I N S T R U C T I O N S
12