ADJ PRO763, User Instructions, Page: 11 / 26

LED Display On/Off:
To set the LED display to turn off after 10 seconds of inactivity, press the MODE button until “dXX”
is displayed. “XX” represents either “on” or “oFF”. Press the UP or DOWN buttons so that “doff” is
displayed. Now the display will disappear after 10s. Press any button to turn the display on again. Be
advised that the display will turn off automatically after 10 seconds of inactivity.
• “don” = LED display on at all times.
• “doFF” = LED display shuts off after 10 seconds.
LED Display Inversion:
Follow these instructions to flip the display 180° so that the display can be read upside down.
1. Plug the fixture in and press the MODE button until “dXX” is displayed. “XX” represents either “on”
or “oFF”.
2. Press the SET UP button until “Stnd” is displayed.
3. Press the UP or DOWN buttons to “flip” the display 180°.
Operating Modes:
You can use the Profile Panel RGBA in either a stand alone mode or a primary/secondary configuration.
There are a total of 6 modes to choose from:
• Built-In Program - There are 22 built-in programs to choose from with multiple adjustments.
• Auto Run - Random programs will run with adjustable fade speed and strobe.
• Sound Active mode - The unit will react to sound, chasing through the built in programs.
• RGBA Dimmer mode - Choose one of the three colors to remain static, or adjust the intensity of
each color to make a custom color.
• Static Color Mode - Choose 1 of 47 color macros.
• DMX control mode - Control each individual fixture trait with a standard DMX 512 controller.
DMX Mode:
There are four DMX Modes to choose from: 4 Channels, 7 Channels, 9 Channels, and 32 Channels.
Operating through a DMX controller give the user the freedom to create custom programs tailored to
the user’s individual needs.
1. Press the MODE button until “dXXX” is displayed. “XXX” represents the displayed DMX address.
Use the UP and DOWN buttons to find your desired DMX address.
2. Once you have found your desired DMX address, press the SET UP button to select the desired DMX
channel mode. Use the UP and DOWN buttons to find you desired channel mode. Selectable options
include 4-Channel Mode (Ch04), 7-Channel Mode (Ch07), 9-Channel Mode (Ch09), or 32-Channel
Mode (Ch32). Please refer to the DMX Traits section of this manual for detailed information.
3. After you have found your desired DMX mode and set the DMX address, use the XLR connections
to link the fixture to any standard DMX controller.
Sound Active Mode:
1. Plug the fixture in and press the MODE button until “SUXX” is displayed. “XX” represents the sound
sensitivity level.
2. Use the UP or DOWN buttons to adjust the sound sensitivity. “SU00” is off, “SU01” is the lowest
sensitivity, and “SU31” is the highest sensitivity.
3. Press SET UP if you wish to activate the Flash mode. “FS.XX” will now be displayed, indicating that
the unit is in Flash mode. The Flash can be adjusted between “FS00” (flash off) to “FS15” (fastest
flash).
O P E R AT I N G I N S T R U C T I O N S
11