ADJ LTS COLOR, User Manual, Page: 15 / 18

15
R E M O T E C O N T R O L
PAIRING:
The original remote that comes in the b ox is already paired to the unit. In the event that
the remote is not paired with the unit, or if pairing to an additional unit, follow the steps below :
1) Unplug the power to the main unit and reconnect the power after ten seconds.
2) Press the “SPEED – “ and “SPEED +” keys together within 5 seconds of reconnecting the
power.
CHANGE OUTP U T COLOR SEQUENCE:
The default out put color se quence is: Green, Red, and
Blue. If for any reason, the unit is displaying a different sequence, or the Direct Color Select keys
do not match, the unit can be reconfigured by following the steps below:
1) Unplug the power to the main unit and reco nnect the power after ten seconds.
2) Press the “RED” and “Blue” keys together within 5 seconds of powering the unit on.
a. The unit will toggle between 6 color combinations and the sequence will be memorized.
POWER
Turns the unit ON and restores the unit to p revious status. If the unit is on, the unit will enter standby
mode.
DEMO
Play 17 dynamic modes in a loop. Each mode repeats 3 times .
MODE +/ -
T h i s bu t t o n l e t s y o u c y cl e t hroug h colo r f ad e mod e , colo r
ch a ng e mod e , a n d a u t o r u n mod e s . Eac h p r e s s o f t h e bu t t o n
will ch a ng e t o t h e n e x t mod e . There are 22 di f f e r e nt prog ra ms .
Y o u c a n u s e t h e “+ ” a n d “ - ” bu t t on s t o c y cl e t hroug h the 22
prog ra ms .
SPEED +/ -
There are 10 speeds to choose from. Select the speed using
t h e “ S P EE D + ” or “ SPEED – “ button .
COLOR + \ -
There are 20 colors to choose from. S elect t h e color using t h e
“ COLOR +” or “COLOR – “ button.
BRIGHT + \ -
There are 8 brightness levels to choose from. Adjust the
brightness using t h e “ BRIGHT +” or “BRIGHT – “ button.
DIRECT COLOR SELECT BUTTONS
The re are 7 shortcut keys . Each key represents a static color .
These colors are also included in COLOR +/ - selections.