ADJ LTS COLOR User Manual Download Page 11

 

       

     

 

11

 

I N S T A L L A T I O N

 

I N S T R U C T I O N S

 

 

FLAMMABLE MATERIAL WARNING

 

Keep devices

 

minimum 5.0 feet (1.5m) away from flammable mater

ials and/or pyrotechnics.

 

 

ELECTRICAL CONNECTIONS

 

A qualified electrician should be used for all electrical connections and/or installations.

 

 

DO NOT INSTALL THE DEVICES

 

IF YOU ARE NOT QUALIFIED TO DO SO!

 

BEFORE MOUNTING DEVICES, A PROFESSIONAL EQUIPMENT INSTALLER MUST BE 
CONSULTED. 
 
AVOID INSTALLING OR MOUNTING THE UNIT IN UNSTABLE LOCATIONS, SUCH AS AN 
UNEVEN SURFACE OR MOVING TABLE. DOING SO MAY RESULT IN THE UNIT FALLING 
DOWN AND CAUSING PERSONAL INJURY AND/OR PROPERTY DAMAGE. 
 
WHEN USING THE UNIT OUTSIDE UNDER STRONG WIND, TAKE APPROPRIATE MEASURES TO 
PREVENT IT FROM FALLING DOWN. 
 
TIGHTEN EACH KNOB AND BOLT SECURELY. ENSURE THAT THE BRACKET HAS NO LOOSE 
KNOBS OR JOINTS AFTER INSTALLATION TO PREVENT ACCIDENTS AND OR INJURY. 
 
AVOID PLACING THE UNIT IN A DOORWAY OR OTHER HIGH TRAFFIC AREAS AS PEOPLE MAY 
TRIP ON THE EQUIPMENT AND CORDS, OR BE INJURED BY FALLING OBJECTS. 
 
FOR ADDED PROTECTION, MOUNT DEVICES IN AREAS OUTSIDE WALKING PATHS, SEATING 
AREAS, OR IN AREAS WERE UNAUTHORIZED PERSONNEL CAN REACH THE DEVICES. 
 
TAKE CARE NOT TO PINCH YOUR FINGERS OR HANDS BETWEEN THE STAND LEGS. 
 
NEVER STAND DIRECTLY BELOW THE DEVICES WHEN MOUNTING, REMOVING OR SERVICING. 
 
DEVICES MUST ALL BE INSTALLED FOLLOWING ALL LOCAL, NATIONAL, AND COUNTRY 
COMMERICAL ELECTRICAL AND CONTRUCTION CODES AND REGULATIONS. 

DO NOT 

EXCEED 

WEIGHT CAPACITY OF 

100

 

LBS. (

45

 

KGS.)

 

 
 

 

Summary of Contents for LTS COLOR



















Reviews: