ADJ LTS COLOR, User Manual, Page: 12 / 18

12
I N S T A L L A T I O N (continued)
SETUP
Loosen Knob B by turning it counter clockwise. Spread the legs by pulling up on the outer pipe until
the stays extend horizontally. Once a desired base height is set, tighten Knob B by turning clockwise.
Loosen Knob A by turning it counter clockwise. Extend the inner pipe to the desired height and insert
the safety pin through the stopper holes in the inner pipe. Secur e and tighten Knob A by turning it
clockwise.