ADJ INNO POCKET SPOT TWINS, User Instructions

Page: 8 / 18

ADJ Products, LLC - www.adj.com - Inno Pocket Spot Twins Instruction Manual Page 15 ADJ Products, LLC - www.adj.com - Inno Pocket Spot Twins Instruction Manual Page 14
Either “ Yes ” or “ No ” will be displayed.
2. To activate the tilt inversion press the UP or DOWN buttons until
“ Yes ” is displayed, press ENTER to confim. To deactivate tilt inver-
sion, select “ No ” and press Enter.
TLT 2
- Tilt Inversion
1. Press the MENU button until “ TLT 2 ” is displayed, press ENTER.
Either “ Yes ” or “ No ” will be displayed.
2. To activate the tilt inversion press the UP or DOWN buttons until
“ Yes ” is displayed, press ENTER to confim. To deactivate tilt inver-
sion, select “ No ” and press Enter.
LED -
With this function you can have the display back-
light turn off after 10 seconds.
1. Press the MENU button until “ LED ” is displayed, press ENTER.
2. The display will show either “ ON” or “OFF ”. Press the UP or
DOWN buttons to select “ ON ” to keep the LED display on at all
times, or “ OFF ” to switch to have the LED display switch off after 10
seconds.
3. Press ENTER to confirm. To make you LED display reappear again
press any button.
DISP -
This function will reverse the display 180º.
1. Press the MENU button until “ DISP ” is displayed, press ENTER.
2. Press ENTER to “flip” the display. Press ENTER to “flip” it again.
Press ENTER when you have made your desired setup.
TEST
- This function will run a self test program.
1. Press the MENU button until “ TEST ” is displayed, press ENTER.
2. The fixture will now run a self test.
MANU
- In this submenu you are able to test the different
Inno Pocket Spot Twins System Menu
functions; pan, tilt, colors, gobos, dimmer, and strobe.
1. Press the MENU button until “ MANU ” is displayed, press ENTER.
2. Use the UP and DOWN buttons to scroll through the various func-
tions able for testing. Once you have found your desired function you
would like to test press ENTER.
3. After you have pressed ENTER, use the UP and DOWN buttons
to adjust the values and test the function. To exit press the MENU
button.
FHRS
- With this function you can display the running
time of the unit.
1. Press the MENU button until “ FHRS ” is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press MENU
to exit.
VER
- Use this function to display the Software version of
the unit.
1. Press the MENU button until “ VER ” is displayed, press ENTER.
2. The display will show the software version.
RSET
- Use this function to reset the unit.
1. Press the MENU button until “ RSET ” is displayed, press ENTER.
2. The fixture will now reset.
Inno Pocket Spot Twins System Menu