ADJ Products, LLC - www.adj.com - Inno Pocket Spot Twins Instruction Manual Page 10
ADJ Products, LLC - www.adj.com - Inno Pocket Spot Twins Instruction Manual Page 11
Inno Pocket Spot Twins
System Menu
System Menu: When making adjustments press ENTER to
confirm your setup then press and hold the MENU button
for at least 3 seconds. To exit without making any adjust-
ments press the MENU button. The display will lock after 30
seconds, press the MENU button for 3 seconds to unlock.
ADDR -
DMX Address Setting
.
1. Press the MENU button until “
ADDR
” is displayed, press ENTER.
2. The current address will now be displayed and flashing. Press the
UP or DOWN buttons to find your desired address. Press ENTER to
set your desired DMX address.
CHND -
This will let select your desired DMX channel
mode.
1. Press the MENU button until “
CHND
” is displayed, press ENTER.
Either “
19CH
” or “
23CH
” will be displayed
2. Press the UP or DOWN buttons to find your desired DMX channel
mode and press ENTER to confim and exit.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Press the MENU button until “
SLND
” is displayed, press ENTER.
Either “
SL 1
”, “
SL 2
”, or “
MAST
” will be displayed.
2. Press the UP or DOWN buttons until your desired setting is dis-
played, press ENTER to confim.
NOTE: In a Master/Slave configuration you can set one fixture to
Master and then set the next fixture to “
SL 2
”, the fixtures will now
have contrast movement to each other.
SHND -
Show modes 0-4 (Factory programs). Show
mode can run with or without sound active mode active.
1. Press the MENU button until “
SHND
” is displayed, press ENTER.
2. “
Sh X
” will now be displayed, “
X
” representing a number between
Inno Pocket Spot Twins
System Menu
