ADJ INN119, User Manual

Page: 23 / 26

23
F U S E R E P L A C E M E N T
Locate and remove the unit’s power cord, then find the fuse holder inside the power socket. Insert a
flat-head screw driver into the power socket and gently pry out the fuse holder. Remove the bad fuse
and replace with a new fuse of the same rating. Please note that the fuse holder has a built-in socket
for a spare fuse, so be sure not to confuse the spare fuse with the active fuse.
C L E A N I N G
Due to fog residue, smoke, and dust, cleaning the internal and external optical lenses should be car-
ried out periodically in order to optimize light output. Cleaning frequency depends on the environment
in which the fixture operates (i.e. smoke, fog residue, dust, dew). In heavy club use, cleaning on a
monthly basis is recommended. Periodic cleaning will ensure longevity and crisp output.
• Use normal glass cleaner and a soft cloth to wipe down the outside casing.
• Use a brush to wipe down the cooling vents and fan grill.
• Periodically clean the internal and external optics with glass cleaner and a soft cloth.
• Always be sure to dry all parts completely before plugging the unit back in.
T R O U B L E S H O O T I N G
Below are some common problems that you may encounter, with possible solutions.
No light output from the unit:
• Check that the fuse has not been tripped. The fuse is located on the rear panel.
• Check that the fuse holder is fully and correctly seated.
Unit does not respond to sound:
Low frequencies (bass) should cause the unit to react to sound. However, quiet or high-pitched
sounds, including tapping on the microphone, may not activate the unit’s sound reaction.