ADJ INN119, User Manual

Page: 13 / 26

13
S Y S T E M M E N U
System Menu: When making adjustments press ENTER to confirm your setup, then press and
hold the MENU button for at least 3 seconds. To exit without making any adjustments press
the MENU button. The display will lock after 30 seconds of inactivity. To unlock, press and
hold the MENU button for 3 seconds.
ADDR - DMX Address Setting.
1. Press the either the MENU, UP, or DOWN buttons until “ADDR” is displayed, press ENTER.
2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to find
your desired address. Press ENTER to set your desired DMX address.
CHND - Select your desired DMX channel mode.
1. Press the either the MENU button until “CHND” is displayed, and press ENTER. The current DMX
channel mode will be displayed.
2. Press the UP or DOWN buttons to find your desired DMX channel mode and press ENTER to
confim and exit.
ScND - This will let you set unit as a Primary or Secondary in a Primary/Secondary
configuration.
1. Press the MENU button until “ScND” is displayed, then press ENTER. Either “Pr1”, “SEC1”, or
“SEC2” will be displayed.
2. Press the UP or DOWN buttons until your desired setting is displayed, and press ENTER to
confim.
NOTE: When a fixture in a primary/secondary configuration is set to “SEC2”, the fixture will move in
contrast to the primary unit.
SHND - Show modes 1-4. Show mode can run with or without sound active mode active.
1. Press the MENU button until “SHND” is displayed, and press ENTER.
2. “Sh X” will now be displayed, “X” representing a number between 1- 4. Use the UP or DOWN
buttons to find your desired show.
3. When you have found your desired show press ENTER, then press and hold the MENU button for
at least 3 seconds to activate.
SOUN - Sound Active mode.
1. Press the MENU button until “SOUN” is displayed, and press ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or DOWN buttons to select “ON” to acti-
vate sound active mode, or “OFF” to deactivate sound active mode.
3. Press ENTER to confirm.
SENS - Adjust the sound sensitivity.
1. Press the MENU button until “SENS” is displayed, and press ENTER.
2. A number between 0-100 will be displayed. Press the UP or DOWN buttons to adjust the sound
sensitivity. 0 is the least sensitive, and 100 is the most sensitive.
3. When you have found your desired setting press ENTER to confirm.