ADJ INN119, User Manual

Page: 15 / 26

15
S Y S T E M M E N U
MANU - In this submenu you are able to test the different functions; pan, tilt, LEDs, zoom, dim-
mer, and strobe.
1. Press the MENU button until “MANU” is displayed, then press ENTER.
2. Use the UP and DOWN buttons to scroll through the various functions available for testing. Once
you have found your desired function you would like to test, press ENTER.
3. Use the UP and DOWN buttons to adjust the values and test the function. To exit press the MENU
button.
TEMP - With this function you can check the temperature of the fixture.
1. Press the MENU button until “TEMP” is displayed, then press ENTER.
2. The fixture temperature will now be displayed. Press MENU to exit.
FHRS - With this function you can display the running time of the unit.
1. Press the MENU button until “FHRS” is displayed, then press ENTER.
2. The running time of the fixture will now be displayed. Press MENU to exit.
VER - Use this function to display the Software version of the unit.
1. Press the either the MENU button until “VER” is displayed, then press ENTER.
2. The display will show the software version.
RSET - Use this function to reset the unit.
1. Press the MENU button until “RSET” is displayed, then press ENTER.
2. The fixture will now reset.
BALA - With this function you can adjust the RGB colors to make your desired color.
1. Press the MENU button until “BALA” is displayed, then press ENTER.
2. Use the UP or DOWN buttons to find the color you wish to adjust, then press ENTER.
3. The displayed value will begin to flash. Use the UP or DOWN buttons to adjust the value. Once
you have made your adjustment press ENTER.
4. Repeat steps 2-3 until satisfied with the color displayed.