30
S Y S T E M M E N U
DMX SETTINGS
- The submenus listed under DMX SETTINGS are as follows: DMX Address, DMX
Channel Mode, and No DMX Status.
• DMX ADDRESS
- In this submenu you can find and set your desired DMX address.
• DMX CHANNEL MODE
- In this submenu you can find and set your desired DMX channel mode.
• NO DMX STATUS
- This submenu setting determines how the device will behave in the event that
the DMX signal is lost or interrupted. The operating mode chosen in this submenu is the running
mode the fixture will go into when the DMX signal is lost. Listed below are the 4 modes.
-
Hold Last
- This setting will have the fixture stay in the last DMX setup.
-
Blackout
- This setting will have the fixture automatically go into stand by mode.
-
Int Programs
- This setting will have the fixture default to the last program selected in the
Internal Programs system menu.
-
Manual
- This setting will go into the current manual control set up. See MANUAL CONTROL.
ETHERNET SETTINGS
– The submenus listed under ETHERNET SETTINGS are as follows:
Protocol, IP Address, Net Mask, Artnet Universe, sACN Settings, and Lock Ethernet Settings.
• Protocol
– Allows the user to select from Artnet, sACN, or KlingNet as the communications
protocol to be used. This may also be disabled for manual control.
• IP Address
– Shows the IP address of the unit, and allows the user to assign a custom IP address
if desired.
• Net Mask
– Shows the netmask of the unit.
• Artnet Universe
– Displays the currently-assigned Artnet Universe value, and allows the user to
define a custom value, if desired.
• sACN Settings
– Displays currently-assigned values for the sACN Universe and sACN Priority,
and allows the user to define custom values for both parameters, if desired.
• Lock Ethernet Setting
– Locks or permits changes to Ethernet Settings.
PERSONALITY
7KH VXEPHQXV OLVWHG XQGHU 3(5621$/,7< DUH DV IROORZV 6HOHFW 6LJQDO 6WDWXV
Settings, WiFly Settings, Fan Settings, Dim Modes, LED Refresh Rate, Gamma Setting, Reset
Motors, Display, and Service.
• SELECT SIGNAL
- In this submenu you can select your desired DMX control mode:
-
DMX
- Control the unit via DMX cable connection.
-
WiFly
- Control the unit via WiFly.
-
WiFly and DMX Out
- Control the unit via WiFly connection. The DMX signal is sent to the next
unit via DMX cable.
• STATUS SETTINGS
- In this submenu you are able to access and adjust/change: Pan Invert, Tilt
Invert, P./T. Feedback, P./T. Speed, and Hibernation.
• WIFLY SETTINGS
- In this submenu you are able to access and adjust/change: WiFly Channel
setting and Enable/Disable WiFly.
• FAN SETTINGS
- In this submenu you are able to select your desired fan speed settings for both
the head and base fans.
• DIM MODES
- In this submenu you are able to select your desired dimmer mode and adjust the
dimming speed time. See section pertaining to the Dimmer Curve Charts.
• LED REFRESH RATE
- In this submenu you are able to select your desired LED refresh rate.
• GAMMA
- In this submenu you are able to select your desired gamma setting.
• RESET MOTORS
- In this submenu you are able to reset selected motors.
• DISPLAY
- In this submenu you are able to access and adjust/change the backlight intensity,
display inversion, screen saver display time, and display lock function.
• SERVICE
- In this submenu you are able to access the calibration adjustment, software update,
and restore the factory settings.
Summary of Contents for HYDRO WASH X19
