ADJ HYDRO WASH X19, User Manual

Page: 20 / 47

20
Channel Mode Unit 1 Address Unit 2 Address Unit 3 Address Unit 4 Address
16 Channels 1 17 33 49
20 Channels 1 21 41 61
26 Channels 1 27 53 79
30 Channels 1 31 61 91
88 Channels 1 89 177 265
90 Channels 1 91 181 271
D M X A D D R E S S I N G
All fixtures should be given a DMX starting address when using a DMX controller, so the correct
fixture responds to the correct control signal. This digital starting address is the channel number from
which the fixture starts to “listen” to the digital control signal sent out from the DMX controller. The
assignment of this starting DMX address is achieved by setting the correct DMX address on the digital
control display on the fixture.
<RXFDQVHWWKHVDPHVWDUWLQJDGGUHVVIRUDOOIL[WXUHVRUDJURXSRIIL[WXUHVRUVHWGLIIHUHQWDGGUHVVHV
for each individual fixture. Setting all fixtures to the same DMX address will cause all fixtures to
react in the same way. In other words, changing the settings of one channel will affect all the fixtures
simultaneously.
If you set each fixture to a different DMX address, each unit will start to “listen” to the channel number
you have set, based on the quantity of DMX channels of each fixture. That means changing the
settings of one channel will only affect the selected fixture.
For example, when operatin this device in 16 Channel Mode, you should set the starting DMX address
of the first unit to 1, the second unit to 17 (1 + 16), the third unit to 33 (1 + 16 + 16), and so on.