ADJ HYDRO WASH X19, User Manual

Page: 15 / 47

15
F I X T U R E I N S TA L L AT I O N
The trussing or area of installation must be able to support at least 10 times the weight without any
deformation. The unit must be secured with a secondary safety attachment, such as an appropriately
rated safety cable. Never stand directly below the unit when mounting, removing, or servicing the unit.
Overhead mounting requires extensive experience, including calculating working load limits,
installation material being used, and periodic safety inspection of all installation material and the unit.
If you lack these qualifications, do not attempt the installation yourself.
The installation should be checked by a skilled person once a year.
The Hydro Wash X19 is fully operational in three different mounting positions: hanging upside-down,
mounted sideways on trussing, or set on a flat level surface. Always use and install a safety cable as
a safety measure to prevent accidental damage and/or injury in the event the clamp fails. Never use
the carrying handles to secure the secondary attachment.
SIDE MOUNTING
T O M A I N TA I N I P 6 5 R AT I N G
,17(*5,7< ),;785( 0867 %(
INSTALLED WITH CABLES FACING
T H E G R O U N D AT A L L T I M E S .
:$7(5 0867 ($6,/< 581 2))$1'
NOT COLLECT AROUND CABLE
CONNECTIONS.
SAFETY CABLE
$ /: $< 6 $7 7$ & + $ 6 $ ) ( 7 <
CABLE WHENEVER INSTALLING
THIS FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE THE
FIXTURE WILL NOT DROP IF THE
CLAMP FAILS.
LCD
CONTROL
CABLES
DOWN
LCD
CONTROL
CABLES
DOWN