ADJ HYD190, User Manual

Page: 15 / 52

15
The trussing or area of installation must be able to support at least 10 times the weight without any
deformation. The unit must be secured with a secondary safety attachment, such as an appropri-
ately rated safety cable. Never stand directly below the unit when mounting, removing, or servicing
the unit.
Overhead mounting requires extensive experience, including calculating working load limits, installa-
tion material being used, and periodic safety inspection of all installation material and the unit. If you
lack these qualifications, do not attempt the installation yourself.
The installation should be checked by a skilled person once a year.
The Hydro Wash X19 is fully operational in three different mounting positions: hanging upside-down,
mounted sideways on trussing, or set on a flat level surface. Always use and install a safety cable as
a safety measure to prevent accidental damage and/or injury in the event the clamp fails. Never use
the carrying handles to secure the secondary attachment.
FIXTURE INSTALLATION
SIDE MOUNTING
TO MAINTAIN IP65 RATING INTEGRITY,
FIXTURE MUST BE INSTALLED WITH
CABLES FACING THE GROUND AT ALL
TIMES. WATER MUST EASILY RUN OFF
AND NOT COLLECT AROUND CABLE
CONNECTIONS.
SAFETY CABLE
ALWAYS ATTACH A SAFETY CABLE
WHENEVER INSTALLING THIS FIXTURE
IN A SUSPENDED ENVIRONMENT TO
ENSURE THE FIXTURE WILL NOT DROP IF
THE CLAMP FAILS.